PENTANE PRODUCT DESCRIPTION
Simple Solvents Normal Pentane (n-Pentane) is a straight chain alkane consisting of 5 carbon atoms and is widely applied in laboratories as a non-polar solvent. n-Pentane is relatively stable, largely non reactive and an easily evaporated solvent.
n-Pentane is used to extract oils from plant flowers, seeds, leaves and stalks. Additionally, n-Pentane plays an important role in cannabinoid isolation and synthesis. n-Pentane is increasingly popular in the cannabis industries as it acutely dissolves THC rather than plane matter. This product is not for human consumption. Users should avoid direct contact with this chemical.
n-Pentane is used to extract oils from plant flowers, seeds, leaves and stalks. Additionally, n-Pentane plays an important role in cannabinoid isolation and synthesis. n-Pentane is increasingly popular in the cannabis industries as it acutely dissolves THC rather than plane matter. This product is not for human consumption. Users should avoid direct contact with this chemical.
PENTANE PRODUCT DOCUMENTATION
PENTANE PRODUCT INFORMATION
Uses
Plant oil extraction , processing solvent, cleaning, plant oil, isolation, oil refinement
Common Names
Normal heptane, n pentane, pure pentane, high purity pentane, n-pentane
Chemical Formula
C5H12
CAS#
109-66-0
UN#
1206
Pounds per Gallon
5.25
Melting Point
-129.67 degrees C (-201.4 degrees F)
Boiling Point
36.06 degrees C (96.9 degrees F)
Flash Point
40.0 degrees C (104 degrees F)
Vapor Pressure
59.0 kPa (442.84 mmHg)
Plant oil extraction , processing solvent, cleaning, plant oil, isolation, oil refinement
Common Names
Normal heptane, n pentane, pure pentane, high purity pentane, n-pentane
Chemical Formula
C5H12
CAS#
109-66-0
UN#
1206
Pounds per Gallon
5.25
Melting Point
-129.67 degrees C (-201.4 degrees F)
Boiling Point
36.06 degrees C (96.9 degrees F)
Flash Point
40.0 degrees C (104 degrees F)
Vapor Pressure
59.0 kPa (442.84 mmHg)
PENTANE SAFETY INFORMATION
Risk factors
Flammable, dangerous fire risk. TLV: Do not exceed 120 ppm in air.
Hazard Statement
Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating, and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wash hands thoroughly after handling. Wear protective gloves and eye and face protection. IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention. If eye irritation persists: get medical attention. If medical advice is needed, have product container or label at hand. Keep out of reach of children.
NFPA Hazard Classification
Health: 1 (Slight) Materials that, on exposure, would cause significant irritation, but only minor residual injury, including those requiring the use of an approved air-purifying respirator. These materials are only slightly hazardous to health and only breathing protection is needed. Flammability: 4 (Extreme) This degree includes flammable gases, flammable cryogenic materials, pyrophoric liquids, and Class IA flammable liquids. The preferred method of fire attack is to stop the flow of material or to protect exposures while allowing the fire to burn itself out. Instability: 0 (Minimal) This degree includes materials that are normally stable, even under fire exposure conditions, and that do not react with water. Normal fire fighting procedures may be used.
Signal Word
Danger
Environmentally Damaging
Category 2
Acute Aquatic Toxicity
Category 2
Flammable liquids
Category 2
Aspiration Toxicity
Category 1
Skin Corrosion / Irritation
Category 2
Eye Irritation
Category 2
Specific target organ toxicity (single exposure)
Category 3
Flammable, dangerous fire risk. TLV: Do not exceed 120 ppm in air.
Hazard Statement
Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating, and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Wash hands thoroughly after handling. Wear protective gloves and eye and face protection. IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention. If eye irritation persists: get medical attention. If medical advice is needed, have product container or label at hand. Keep out of reach of children.
NFPA Hazard Classification
Health: 1 (Slight) Materials that, on exposure, would cause significant irritation, but only minor residual injury, including those requiring the use of an approved air-purifying respirator. These materials are only slightly hazardous to health and only breathing protection is needed. Flammability: 4 (Extreme) This degree includes flammable gases, flammable cryogenic materials, pyrophoric liquids, and Class IA flammable liquids. The preferred method of fire attack is to stop the flow of material or to protect exposures while allowing the fire to burn itself out. Instability: 0 (Minimal) This degree includes materials that are normally stable, even under fire exposure conditions, and that do not react with water. Normal fire fighting procedures may be used.
Signal Word
Danger
Environmentally Damaging
Category 2
Acute Aquatic Toxicity
Category 2
Flammable liquids
Category 2
Aspiration Toxicity
Category 1
Skin Corrosion / Irritation
Category 2
Eye Irritation
Category 2
Specific target organ toxicity (single exposure)
Category 3
PENTANE SHIPPING INFO
DOT
n-Pentane UN Number - UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
TDG
UN-No UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
IATA UN-No
UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
IMDG/IMO UN-No
UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
Marine pollutant: Yes
Per DOT regulations, these drums & totes must be transported straight-up and safely tied down.
Please DO NOT transport the drum on its side as this is a highly flammable product and they can leak if transported horizontally.
n-Pentane UN Number - UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
TDG
UN-No UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
IATA UN-No
UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
IMDG/IMO UN-No
UN1206
Proper Shipping Name PENTANES
Hazard Class 3
Packing Group II
Marine pollutant: Yes
Per DOT regulations, these drums & totes must be transported straight-up and safely tied down.
Please DO NOT transport the drum on its side as this is a highly flammable product and they can leak if transported horizontally.
ORDERING INFORMATION
THE FREIGHT COST IS NOT INCLUDED IN YOUR PURCHASE OF N PENTANE.
We will call and email you within 2 business hours of when we receive your purchase to provide you with the freight charges, delivery schedule, and required documentation.
IF YOU DO NOT HAVE A FORKLIFT OR LOADING DOCK AT THE RECEIVING LOCATION, THERE IS AN ADDITIONAL $150 FEE PER LOAD.
A copy of your unexpired DRIVERS LICENSE, STATE ID CARD, or US PASSPORT and your completed and signed CLIENT ONBOARDING FORM must be sent back to us before your order can be processed and shipped.
We will call and email you within 2 business hours of when we receive your purchase to provide you with the freight charges, delivery schedule, and required documentation.
IF YOU DO NOT HAVE A FORKLIFT OR LOADING DOCK AT THE RECEIVING LOCATION, THERE IS AN ADDITIONAL $150 FEE PER LOAD.
A copy of your unexpired DRIVERS LICENSE, STATE ID CARD, or US PASSPORT and your completed and signed CLIENT ONBOARDING FORM must be sent back to us before your order can be processed and shipped.
